What To Do If Your Water Heater Suddenly Stops Working
What To Do If Your Water Heater Suddenly Stops Working
Blog Article
The article author is making several good annotation related to No Hot Water — Water Heater Repair in general in this article directly below.
Numerous modern-day houses make use of an electrical water heater for their heating system, because of its convenience and also simplicity of use. However, much like any other electrical devices, issues may develop with its usage, all of a sudden. It can be really discouraging to wake up to a cool shower rather than a warm one or having your bath with water that isn't warm enough and even too warm. Whatever the case might be, water heater troubles can be quite stressful. The good news is, we have actually made a checklist of possible remedies to your hot water heater problems. There are a variety of elements that can trigger much of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it dealt with should not pose too much of a problem if you adhere to these steps:
Check Your Power Supply:
As fundamental as this might appear, it is really needed. Without adequate power, your water heater will certainly not function. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power issue. Examine if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, merely turn it off and on again. Replace any type of damaged or damaged fuse. Examine the device with power after these changes to see if it's now functioning.
Check the Burner in the Water Heater:
If it's not a power problem, then try having a look at your burner if it is still functioning. Check each of your burner to ensure the trouble isn't with any one of them. If any of them is defective, replace that part and then check whether the hot water is back on.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you may need to examine the temperature level setups on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature reset above the thermostat. This should help heat the water. Turn the circuit breaker back on and examine if the trouble has actually been settled.
Call A Specialist:
If after changing all damaged components and also resetting your temperature level, the hot water heater still isn't working, you may need to speak to a specialist plumber for an expert viewpoint. The problem with your heater could be that the cold and hot taps have actually been switched over or it might be undersized for the amount of hot water required in your house. Whatever the situation may be, a professional plumber would certainly aid fix the issue.
Conclusion
Hot water heater troubles are not always major. Many of them result from small problems like a blown fuse or worn-out burner. Changing the defective components should suffice. Nevertheless, if you are still not able to solve the trouble, give a call to your nearby plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I found that blog post on What Would Cause My Electric Water Heater to Stop Working? while scouting around the search engines. So long as you liked our blog posting if you please do not forget to pass it around. We enjoy reading our article about No Hot Water — Water Heater Repair.
About This
Report this page